These fault codes apply to the Asko TD25 Circle Series tumble dryers and are identical to the ISE CD60 (condenser dryer) and DV60 vented tumble dryer models based on the Asko produced tumble dryers produced in Sweden by Asko.
The fault codes below will apply to tumble dryers from Asko sold in various countries around the world, the ISE models mentioned and Maytag tumble dryers sold in the UK and France.
Before you start any investigation of the fault or even remove the lid of the tumble dryer please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!
Please remember to support our site by buying tumble dryer spare parts from store and, if you decide that you need an engineer to repair your tumble dryer please support the local tumble dryer repairers that help make this site possible, you can search for a local tumble dryer repairer using the engineer search.
Asko TD25 Tumble Dryer Fault Codes
These fault codes are written for tumble dryer repairers and not for the general public by Asko and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our tumble dryer fault finding guide from this link before you begin.
Please check that any Asko tumble dryer spares recommended are suitable for use on your particular model and serial code. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your tumble dryer. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.
This fault is most often caused by blockages, failure to clean the tumble dryer filters and condensate unit regularly.
This error will only appear on condenser tumble dreyr models.
Maximum permitted programme time the tumble dryer stops after 3 hours
Thermistor fault and the tumble dryer will halt, program aborted
The faults marked with an asterix are the top causes of the particular error code being displayed.
These models are very reliable machines and tend not to fail, the biggest single cause of any issues is use or misuse, overloading, failure to clean filters and condenser units and so on. Please check thoroughly before calling an engineer.
More Asko Tumble Dryer Help, Advice And Guidance
Should you need more help and guidance please use the links from this article as most of them will help you to understand your Asko tumble dryer a lot better and probably very much help you in diagnosing any fault you have. Of course there are many other articles on the site that will also help you do this.
In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.
You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other tumble dryers:
- We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
- We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
- We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
- No warranty is inferred, implied or given.
You also have to be aware that these tumble dryer fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.
Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Asko tumble dryer model please post a request to confirm this in the forums.