Shop For Domestic Appliance Spare Parts

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible

Use this link to email us, tell us what you need and we'll do all the work for you

shop spare parts

washing machine tumble dryer cooker & oven cooker hood fridge freezer dishwasher vacuum cleaner

User Rating: 4 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Inactive
 

AEG Lavamat Fault Codes

AEG brand logo

These fault or error codes apply to older AEG Lavamat washing machine models from the 8*** Series onwards before production moved away from Germany.

These are the one of the common sets of fault codes for AEG washing machine models that were German made. These fault codes will not apply to models later made in Italy etc.

Before you start any investigation of the fault or even remove the lid of your AEG washing machine please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by AEG washing machine spares from our spare part store and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a repairer from the link to the right.

  AEG Lavamat Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by AEG and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin.

Please check that any AEG washing machine spares recommended are suitable for use on your particular model and PNC code. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine. Please, don't guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

C0

Imbalance between both pressure switches, heater or wiring fault

 

C1

No water in, valve at fault or low pressure

 

C2

Pump blockage, pump open circuit, drain blockage

 

C3

Safety flood device operated, pump fault, module fault

 

C4

Drain fault or drain pump faulty

 

C5

Overheat sensor on main motor

 

C6

Pressure switch fault

 

C7

Heater or heater really fault

 

C8

NTC fault detected

 

C9

Motor tacho fault

 

CA

MOS-FET transitor defective (Replace main module)

 

CB

Overfill/level fault or inlet valve

 

CC

PTC for MOS-FET transistor fault, main motor fault

 

CD

Door interlock fault

 

CF

Checksum EEPROM fault, configuration error on module

  More Help On AEG Washing Machine Faults

Should you need more help and guidance please use the links from this article as most of them will help you to understand your AEG Lavamat washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our help and advice forums after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

  • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
  • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
  • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
  • No warranty is inferred, implied or given.

When looking at fault codes you also have to keep in mind that fault or error codes are not a "magic bullet", they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular AEG washing machine model please post a request to confirm this in the forums.

Gravatar
Fraser
AEG OKO_LAVAMAT 88840 UPDATE
I have a C3 error message, the machine flooded. The filter was very full and it’s now cleaned. How do get the machine faultfree and running again ??
Gravatar
Mark cowling
My A.E.G lava at 74700 started making an incredible thumping noise,like the weights have come off,it was like the front door was being bashed in! Can I have your advice please?
Gravatar
Matt Butcher
please can you tell me what a ECO error code means on an AEG Lavamat 14850
Gravatar
Tariq Mahmood
my AEG washing machine is showing a C2 error. How can I repair this?
Gravatar
T.jones
lavamat 72620. Gives fault c1 when set to come on with delay timer and does not operate. Works ok when set to come on normally
Gravatar
a.fernandes
I have an AEG Electrolux Lavamat 76825There is water in it it wont drain or spin in other words it wont start. Error code E40. Please help
Gravatar
Kenneth Watt
Hi,If you ask in the forums one of the engineers will be able to tell you I would think.
Gravatar
majella
please could you tell me what an error codeE30 means on an AEG lavamat L74700 washing machine

1000 Characters left