Shop For Domestic Appliance Spare Parts

Buy spare parts in our store from our team of spares experts that have a vast knowledge of the domestic appliance industry and will help you find any part you need and get it to you as fast and cheap as possible

  Use this link to email us, tell us what you need and we'll do all the work for you

shop spare parts

User Rating: 3 / 5

Star ActiveStar ActiveStar ActiveStar InactiveStar Inactive
 

The appliance has a reset button, all you may have to do is press it!

On the rear of the machine to the top left (looking from the front) you should see a little red button, press it. If the tumble dryer then works you have found the problem, if not you may still require an engineer to call. 

If this happens repeatedly please ensure that the ventilation is clear ALL the way and that the vent hose is not blocked in any way or the reset thermostat will simply trip again.

A lot of the information about blockages etc, in this article by Penguin45 also applies to these tumble dryers as well.

  Never heard of Crosslee

Crosslee are one of the largest manufacturers of tumble dryers in Europe but they are not so often seen under their own brand name, or their wholly owned "White Knight" brand as they are under other guises. In short Crosslee will manufacture for almost anyone and do.

The dryers discussed here are seen under the Whirlpool brand, both Hygnena and Diplomat brands (sold by MFI and Howdens Joinery) as well as Bosch. I'm sure that there are others, but it is hard remember them all.

We have included at the foot of this page a list of the known models that we have and for which brand that they were sold under.

  Other Hints And Tips

Basic electrical safety for appliances, more from the link

Heater failures in this tumble dryer are very, very common, although to be fair we only see them once the element is faulty. We do stok the heater element for this dryer and you can get it from this link in the shop

Other common failures are the little exhaust thermostat. This is the little thermostat with two wires connected by spade terminals directly to the thermostat and not the one with the wires soldered on.

The control thermostat is also a common part to be used on this tumble dryer and you can find that spare part from this link in our spares shop

It's not too bad to replace the heater or either of the thermostats (or even all three) if you take your time and have a reasonable mechanical skill. 

  Tumble Dryer Models This Applies To


White Knight and Crosslee Tumble Dryers

CL412, CL412FV, CL412GV, CL417AV, CL417BV, CL417OGV, CL417WV, CL417YV, CL421, CL427AV, CL427BV, CL427CV, CL427OGV, CL427SV, CL427WV, CL427YV, CL432A, CL432FV, CL432GV, CL437AV, CL437BV, CL437OGV, CL437WV, CL437YV, CL447AV, CL447BV, CL447CV, CL447OGV, CL447SV, CL447WV, CL447YV, CL687SV, CL431A, CL431W, CL432/1/02, CL432A, CL432FV, CL432W, CL511A, CL511W, CL512, CL612, CL632, CL637/WV, CL727, CL727B, CL727CH, CL727OG, CL727Y, CL741, CL762, CL767, CL767B, CL767C, CL767OG, CL767SV, CL767SVNC, CL767Y, CL777TS, CL787, CL787B, CL787OG, CL787Y, CL797B, CL797C, CL797OG, CL797R, CL797Y

Philips Whirlpool Tumble Dryers

AWB650BBGR, AWB650BR, AWB653/BVK, AWB653/VK, AWB672WH, AWB674, AWB675/VK, AWB679, AWB681PH, AWB682, AWG210/1WH, AWG221/1AL, AWG221/AL, AWB650PH/BRGR, AWB682WH, AWG210/7, AWG210GR, AWG210WH, AWG211, AWG212, AWG220/1, AWG220WH, AWG220WH/1, AWG221/1AL, AWG225, AWG225/1, AWG225/1HAV, AWG225HAV, AWG230, AWG245WH, AWG266, AWG274, CL417W/V, CL437W/WV, RSD459/29, AWB654/1PH, AWB654PH

Hygena And Diplomat Tumble Dryers

APM8530, APM8630

Bosch Tumble Dryers

WTA2000GB/01

Gravatar
Stephen Bent
Not getting hot
My white knight is turning on and spinning but not getting hot and never finishing its cycle. The red button on the back is inactive and does not appear to have tripped
Gravatar
Steve
White knife power button turns off when released
Quote :
The power button on our machine isn\'t clicking on. When the button is pressed it works but when you let go it turns off. Is this repairable by myself?

Gravatar
J Johnson
White knight tumble dryer
The dryer makes a humming sound when it\'s switched on but it won\'t start up, I\'ve checked the drive belt it\'s ok, the motor seems fine any idea what it could be ?
Gravatar
Katyb0024
Tumble dryer is working fine but has started to make a terrible banging noise as it spins? What could be wrong n can it be fixed?
Gravatar
ricky86
The power button on our machine isn't clicking on. When the button is pressed it works but when you let go it turns off. Is this repairable by myself?
Gravatar
Redmond Hartley
my white knight tumble dryer keeps cutting my house power off every time I press start button could someone help
Gravatar
Andrew vice
My white knight tumble is heating the clothes but there is a burning smell mixing with the clothes? All filters are clear. The belt is worn down, could this be over heating and causing the smell?

1000 Characters left